{overleaf template gallery}LaTeX templates

HKUST Thesis template for RPG implemented with LaTeX3 香港科技大学研究型研究生(RPG)毕业论文模板 请阅读PDF文档（支持中英文） Please read the PDF documentation. Chinese and Engligh support. GitHub & PDF Documentation: https://github.com/HKFoggyU/hkust-thesis hkustthesis, hkust-thesis Latest version: v0.10.1 Dated: 2024/Dec/31

If you are a student at the Sasakawa International Center for Space Architecture at the University of Houston, you'll probably find yourself looking for a reliable LaTeX template for your Master's thesis. Unfortunately, UH doesn't provide an official template with which you can work, but our department is different. This template is open to be used by any SICSA student whom, under the guidance of our faculty and staff members, is looking forward to write their thesis while learning LaTeX. As students of the Sasakawa International Center for Space Architecture, you're required to follow the formatting guidelines provided by the University of Houston: https://uh.edu/nsm/students/graduate/thesis-guidelines/thesis-instructions/

This is a sample file for ACM large trim, single column journals, using acmart.cls v2.12 (2025/01/02). This template is provided by the ACM - please see the ACM Submission Guidelines page for more details on manuscript preparation. Important information regarding submission versions for review: After finalizing the formatting of your paper you must use the option “manuscript” with \documentclass[manuscript]{acmart} command. This will generate the output in single column review format which is required. Accepted manuscripts will be transformed during production to produce properly formatted output accord to the publication specifications. Authors will be provided the opportunity to review and approve the formatted output before the article is published to the ACM Digital Library. This large single column format is used for submissions to: Digital Threats: Research and Practice (DTRAP) ACM Transactions on Computing for Healthcare (HEALTH) The Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies (IMWUT) ACM Journal on Computing and Cultural Heritage (JOCCH) PACM on Programming Languages (PACMPL) Proceedings of the ACM on Measurement and Analysis of Computing Systems (POMACS) ACM Transactions on Applied Perception (TAP) Proceedings of the ACM on Human-Computer Interaction (PACMHCI) Once your article is complete, you can use 'Submit to ACM' button at the top of the Overleaf (formerly writeLaTeX) editor bar to quickly download your paper files and go straight to the appropriate ACM submission site.

This is a sample file for ACM small trim journals using acmart.cls v2.12 (2025/01/02), as provided by the ACM. Please see the ACM Submission Guidelines page for more details on manuscript preparation. Important information regarding submission versions for review: After finalizing the formatting of your paper you must use the option “manuscript” with \documentclass[manuscript]{acmart} command. This will generate the output in single column review format which is required. Accepted manuscripts will be transformed during production to produce properly formatted output accord to the publication specifications. Authors will be provided the opportunity to review and approve the formatted output before the article is published to the ACM Digital Library. This small trim template is used for submissions to the following journals and transactions: Computers in Entertainment (CIE) ACM Computing Surveys (CSUR) Distributed Ledger Technologies: Research and Practice (DLT) Formal Aspects of Computing (FAC) ACM Games: Research and Practice (GAMES) Journal of the ACM (JACM) Journal of Data and Information Quality (JDIQ) Journal of Data Science (JDS) Journal of Experimental Algorithmics (JEA) ACM Journal on Emerging Technologies in Computing Systems (JETC) Proceedings of the ACM on Computer Graphics and Interactive Tech- niques (PACMCGIT) ACM Transactions on Autonomous and Adaptive Systems (TAAS) ACM Transactions on Accessible Computing (TACCESS) ACM Transactions on Architecture and Code Optimization (TACO) ACM Transactions on Algorithms (TALG) ACM Transactions on Asian Language and Low-Resource Information Processing (TALLIP) ACM Transactions on Cyber-Physical Systems (TCPS) ACM Transactions on Data Science (TDSCI) ACM Transactions on Economics and Computation (TEAC) ACM Transactions on Embedded Computing Systems (TECS) ACM Transactions on Evolutionary Learning (TELO) ACM Transactions on Human-Robot Interaction (THRI) ACM Transactions on Interactive Intelligent Systems (TIIS) ACM Transactions on Internet of Things (TIOT) ACM Transactions on Intelligent Systems and Technology (TIST) ACM Transactions on Knowledge Discovery from Data (TKDD) ACM Transactions on Management Information Systems (TMIS) ACM Transactions on Computing Education (TOCE) ACM Transactions on Computer-Human Interaction (TOCHI) ACM Transactions on Computational Logic (TOCL) ACM Transactions on Computer Systems (TOCS) ACM Transactions on Computation Theory (TOCT) ACM Transactions on Design Automation of Electronic Systems (TODAES) ACM Transactions on Database Systems (TODS) ACM Transactions on Information Systems (TOIS) ACM Transactions on Internet Technology (TOIT) ACM Transactions on Modeling and Computer Simulation (TOMACS) ACM Transactions on Multimedia Computing and Communications (TOMM) ACM Transactions on Modeling and Performance Evaluation of Computing Systems (TOMPECS) ACM Transactions on Mathematical Software (TOMS) ACM Transactions on Parallel Computing (TOPC) ACM Transactions on Programming Languages and Systems (TOPLAS) ACM Transactions on Privacy and Security (TOPS) ACM Transactions on Storage (TOS) ACM Transactions on Software Engineering and Methodology (TOSEM) ACM Transactions on Sensor Networks (TOSN) ACM Transactions on Quantum Computing (TQC) ACM Transactions on Reconfigurable Technology and Systems (TRETS) ACM Transactions on Spatial Algorithms and Systems (TSAS) ACM Transactions on Social Computing (TSC) ACM Transactions on Speech and Language Processing (TSLP) ACM Transactions on the Web (TWEB) Once your article is complete, you can use 'Submit to ACM' button at the top of the Overleaf (formerly writeLaTeX) editor bar to quickly download your paper files and go straight to the appropriate ACM submission site.

This is a sample file for ACM generic journal manuscripts, using acmart.cls v2.12 (2025/01/02). It is provided by the ACM as a template for submissions, and pre-loaded in Overleaf (formerly writeLaTeX) for ease of editing online. Please see the ACM Submission Guidelines page for more details on manuscript preparation. Important information regarding submission versions for review: After finalizing the formatting of your paper you must use the option “manuscript” with \documentclass[manuscript]{acmart} command. This will generate the output in single column review format which is required. Accepted manuscripts will be transformed during production to produce properly formatted output accord to the publication specifications. Authors will be provided the opportunity to review and approve the formatted output before the article is published to the ACM Digital Library. All journals use acmsmall with the following exceptions: acmlarge - Large single column format, used for IMWUT, JOCCH, PACMPL, POMACS, TAP acmtog - Large double column format, used for TOG Note: Most proceedings authors will use the "sigconf" proceedings template. If you are unsure which template variant to use, please request clarification from your event or publication contact.

This is a sample file for ACM SIG conference proceedings (except SIGPLAN), using acmart.cls v2.12 (2025/01/02). It is provided by the ACM as a template for submissions, and pre-loaded in Overleaf (formerly writeLaTeX) for ease of editing online. Please see the ACM Submission Guidelines page for more details on manuscript preparation. Note: Most proceedings authors will use this "sigconf" proceedings template. If you are unsure which template variant to use, please request clarification from your event or publication contact. As of March 2017, this format (sigconf) should also be used for SIGGRAPH conferences; and as of May 2020 this format (sigconf) should also be used for SIGCHI conferences. Important information regarding submission versions for review: After finalizing the formatting of your paper you must use the option “manuscript” with \documentclass[manuscript]{acmart} command. This will generate the output in single column review format which is required. Accepted manuscripts will be transformed during production to produce properly formatted output accord to the publication specifications. Authors will be provided the opportunity to review and approve the formatted output before the article is published to the ACM Digital Library.

ACM has transitioned to a new authoring template. This new TeX template (acmart v2.12) consolidates the previous eight individual ACM journal and proceedings templates. The templates are updated to the latest software versions, developed to enable accessibility features, and they use a new font set. The new LaTeX package incorporates updated versions of the following ACM templates: ACM Journals: ACM Small, ACM Large, ACM and TOG (also for SIGGRAPH authors publishing in TOG) ACM proceedings templates: ACM Standard and SIGPLAN All journals use acmsmall with the following exceptions: acmlarge - Large single column format, used for IMWUT, JOCCH, PACMPL, POMACS, TAP, PACMHCI acmtog - Large double column format, used for TOG Note: Most proceedings authors will use the "sigconf" proceedings template. If you are unsure which template variant to use, please request clarification from your event or publication contact. Important information regarding submission versions for review: After finalizing the formatting of your paper you must use the option “manuscript” with \documentclass[manuscript]{acmart} command. This will generate the output in single column review format which is required. Accepted manuscripts will be transformed during production to produce properly formatted output accord to the publication specifications. Authors will be provided the opportunity to review and approve the formatted output before the article is published to the ACM Digital Library. Before using the 2017 ACM consolidated proceedings template, we strongly suggest that you read the TeX User Guide. Authors who plan to use their own packages should read the longer Implementation Guide.

This is a sample file for ACM SIG conference proceedings with the acmsmall format specifications, using acmart.cls v2.12 (2025/01/02). It is provided by the ACM as a template for submissions, and pre-loaded in Overleaf (formerly writeLaTeX) for ease of editing online. Please see the ACM Submission Guidelines page for more details on manuscript preparation. Note: There are only a small group of ACM conferences which permitted to use this template. If you are unsure which template variant to use, please request clarification from your event or publication contact. Important information regarding submission versions for review: After finalizing the formatting of your paper you must use the option “manuscript” with \documentclass[manuscript]{acmart} command. This will generate the output in single column review format which is required. Accepted manuscripts will be transformed during production to produce properly formatted output accord to the publication specifications. Authors will be provided the opportunity to review and approve the formatted output before the article is published to the ACM Digital Library.

This is a sample file for ACM SIGPLAN conference proceedings, using acmart.cls v2.12 (2025/01/02). It is provided by the ACM as a template for submissions, and pre-loaded in Overleaf (formerly writeLaTeX) for ease of editing online. Please see the ACM Submission Guidelines page for more details on manuscript preparation. Note: Most proceedings authors will use the "sigconf" proceedings template. If you are unsure which template variant to use, please request clarification from your event or publication contact. Important information regarding submission versions for review: After finalizing the formatting of your paper you must use the option “manuscript” with \documentclass[manuscript]{acmart} command. This will generate the output in single column review format which is required. Accepted manuscripts will be transformed during production to produce properly formatted output accord to the publication specifications. Authors will be provided the opportunity to review and approve the formatted output before the article is published to the ACM Digital Library.