%% bare_lsens.tex
%% V1.0
%% 2017/07/12
%% by Michael Shell
%% see http://www.michaelshell.org/
%% for current contact information.
%%
%% This is a skeleton file demonstrating the use of IEEE_lsens.cls for
%% an IEEE Sensors Letters paper.
%%
%% Support sites:
%% -- LaTeX Related --
%% http://www.michaelshell.org/tex/ieeetran/
%% http://www.ctan.org/pkg/ieeetran/
%%
%% -- IEEE/Editor/Submission Related --
%% http://www.ieee-sensors.org/
%% http://www.ieee.org/
%%*************************************************************************
%% Legal Notice:
%% This code is offered as-is without any warranty either expressed or
%% implied; without even the implied warranty of MERCHANTABILITY or
%% FITNESS FOR A PARTICULAR PURPOSE!
%% User assumes all risk.
%% In no event shall the IEEE or any contributor to this code be liable for
%% any damages or losses, including, but not limited to, incidental,
%% consequential, or any other damages, resulting from the use or misuse
%% of any information contained here.
%%
%% All comments are the opinions of their respective authors and are not
%% necessarily endorsed by the IEEE.
%%
%% This work is distributed under the LaTeX Project Public License (LPPL)
%% ( http://www.latex-project.org/ ) version 1.3, and may be freely used,
%% distributed and modified. A copy of the LPPL, version 1.3, is included
%% in the base LaTeX documentation of all distributions of LaTeX released
%% 2003/12/01 or later.
%% Retain all contribution notices and credits.
%% ** Modified files should be clearly indicated as such, including **
%% ** renaming them and changing author support contact information. **
%%*************************************************************************
% *** Authors should verify (and, if needed, correct) their LaTeX system ***
% *** with the testflow diagnostic prior to trusting their LaTeX platform ***
% *** with production work. The IEEE's font choices and paper sizes can ***
% *** trigger bugs that do not appear when using other class files. ***
% The testflow support page is at:
% http://www.michaelshell.org/tex/testflow/
% Typically, there isn't any need for class options with IEEE Sensors
% Letters papers. The default, and only, text size is 9pt.
\documentclass{IEEE_lsens}
%
% If IEEE_lsens.cls has not been installed into the LaTeX system files,
% manually specify the path to it like:
% \documentclass{../sty/IEEE_lsens}
% *** Do not adjust lengths that control margins, column widths, etc. ***
% *** Do not use packages that alter fonts (such as pslatex). ***
% There should be no need to do such things with IEEE_lsens.
% (Unless specifically instructed to do so by the IEEE Sensors Letters
% editors, of course.)
% Some very useful LaTeX packages include:
% (uncomment the ones you want to load)
% *** MISC UTILITY PACKAGES ***
%
%\usepackage{ifpdf}
% Heiko Oberdiek's ifpdf.sty is very useful if you need conditional
% compilation based on whether the output is pdf or dvi.
% usage:
% \ifpdf
% % pdf code
% \else
% % dvi code
% \fi
% The latest version of ifpdf.sty can be obtained from:
% http://www.ctan.org/pkg/ifpdf
% Also, note that IEEEtran.cls V1.7 and later provides a builtin
% \ifCLASSINFOpdf conditional that works the same way.
% When switching from latex to pdflatex and vice-versa, the compiler may
% have to be run twice to clear warning/error messages.
% The textcomp package can be loaded to get better \textcopyright and
% \textregistered symbols (as is used in the footer of the title page
% of LSENS papers).
\usepackage{textcomp}
% *** CITATION PACKAGES ***
%
\usepackage[noadjust]{cite}
% cite.sty was written by Donald Arseneau
% V1.6 and later of IEEEtran pre-defines the format of the cite.sty package
% \cite{} output to follow that of the IEEE. Loading the cite package will
% result in citation numbers being automatically sorted and properly
% "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using
% cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's
% \cite will automatically add leading space, if needed. Use cite.sty's
% noadjust option (cite.sty V3.8 and later) if you want to turn this off
% such as if a citation ever needs to be enclosed in parenthesis.
% cite.sty is already installed on most LaTeX systems. Be sure and use
% version 5.0 (2009-03-20) and later if using hyperref.sty.
% The latest version can be obtained at:
% http://www.ctan.org/pkg/cite
% The documentation is contained in the cite.sty file itself.
% *** GRAPHICS RELATED PACKAGES ***
%
\ifCLASSINFOpdf
% \usepackage[pdftex]{graphicx}
% declare the path(s) where your graphic files are
% \graphicspath{{../pdf/}{../jpeg/}}
% and their extensions so you won't have to specify these with
% every instance of \includegraphics
% \DeclareGraphicsExtensions{.pdf,.jpeg,.png}
\else
% or other class option (dvipsone, dvipdf, if not using dvips). graphicx
% will default to the driver specified in the system graphics.cfg if no
% driver is specified.
% \usepackage[dvips]{graphicx}
% declare the path(s) where your graphic files are
% \graphicspath{{../eps/}}
% and their extensions so you won't have to specify these with
% every instance of \includegraphics
% \DeclareGraphicsExtensions{.eps}
\fi
% graphicx was written by David Carlisle and Sebastian Rahtz. It is
% required if you want graphics, photos, etc. graphicx.sty is already
% installed on most LaTeX systems. The latest version and documentation
% can be obtained at:
% http://www.ctan.org/pkg/graphicx
% Another good source of documentation is "Using Imported Graphics in
% LaTeX2e" by Keith Reckdahl which can be found at:
% http://www.ctan.org/pkg/epslatex
%
% latex, and pdflatex in dvi mode, support graphics in encapsulated
% postscript (.eps) format. pdflatex in pdf mode supports graphics
% in .pdf, .jpeg, .png and .mps (metapost) formats. Users should ensure
% that all non-photo figures use a vector format (.eps, .pdf, .mps) and
% not a bitmapped formats (.jpeg, .png). The IEEE frowns on bitmapped formats
% for line art (i.e., plots, graphs, etc.) as they result in
% "jaggedy"/blurry rendering of lines and letters as well as large
% increases in file sizes.
%
% You can find documentation about the pdfTeX application at:
% http://www.tug.org/applications/pdftex
% *** MATH PACKAGES ***
\usepackage[T1]{fontenc} % optional enhanced font encoding
\usepackage{amsmath}
% A popular package from the American Mathematical Society that provides
% many useful and powerful commands for dealing with mathematics.
%
% Note that the amsmath package sets \interdisplaylinepenalty to 10000
% thus preventing page breaks from occurring within multiline equations. Use:
\interdisplaylinepenalty=2500
% after loading amsmath to restore such page breaks as IEEEtran.cls normally
% does. amsmath.sty is already installed on most LaTeX systems. The latest
% version and documentation can be obtained at:
% http://www.ctan.org/pkg/amsmath
\usepackage[cmintegrals]{newtxmath}
% A Times compatible math font is required for IEEE Sensors Letters.
% Michael Sharpe's freely available newtxmath package (version 1.451,
% July 28, 2015 or later) is recommended. The cmintegrals option, which
% IEEE_lsens sets as a default upon loading newtxmath, is/was needed to
% obtain the specific style of integral symbol used by the IEEE Sensors
% Letters. However, as of version 1.5 of the newtxmath package, released
% on 2016/08/12, the correct integral symbol is now invoked by default
% and the cmintegrals option is no longer needed and is silently ignored.
% The latest version and documentation can be obtained at:
% http://www.ctan.org/pkg/newtx
\usepackage{bm}
% support for selective bold math
% The latest version and documentation can be obtained at:
% http://www.ctan.org/pkg/bm
% *** SPECIALIZED LIST PACKAGES ***
%
%\usepackage{algorithmic}
% algorithmic.sty was written by Peter Williams and Rogerio Brito.
% This package provides an algorithmic environment fo describing algorithms.
% You can use the algorithmic environment in-text or within a figure
% environment to provide for a floating algorithm. Do NOT use the algorithm
% floating environment provided by algorithm.sty (by the same authors) or
% algorithm2e.sty (by Christophe Fiorio) as the IEEE does not use dedicated
% algorithm float types and packages that provide these will not provide
% correct IEEE style captions. The latest version and documentation of
% algorithmic.sty can be obtained at:
% http://www.ctan.org/pkg/algorithms
% Also of interest may be the (relatively newer and more customizable)
% algorithmicx.sty package by Szasz Janos:
% http://www.ctan.org/pkg/algorithmicx
% *** ALIGNMENT PACKAGES ***
%
\usepackage{array}
% Frank Mittelbach's and David Carlisle's array.sty patches and improves
% the standard LaTeX2e array and tabular environments to provide better
% appearance and additional user controls. As the default LaTeX2e table
% generation code is lacking to the point of almost being broken with
% respect to the quality of the end results, all users are strongly
% advised to use an enhanced (at the very least that provided by array.sty)
% set of table tools. array.sty is already installed on most systems. The
% latest version and documentation can be obtained at:
% http://www.ctan.org/pkg/array
% IEEEtran contains the IEEEeqnarray family of commands that can be used to
% generate multiline equations as well as matrices, tables, etc., of high
% quality.
% *** SUBFIGURE PACKAGES ***
%\usepackage[caption=false,font=footnotesize,labelfont=sf,textfont=sf]{subfig}
% subfig.sty, written by Steven Douglas Cochran, is the modern replacement
% for subfigure.sty, the latter of which is no longer maintained and is
% incompatible with some LaTeX packages including fixltx2e. However,
% subfig.sty requires and automatically loads Axel Sommerfeldt's caption.sty
% which will override IEEEtran.cls' handling of captions and this will result
% in non-IEEE style figure/table captions. To prevent this problem, be sure
% and invoke subfig.sty's "caption=false" package option (available since
% subfig.sty version 1.3, 2005/06/28) as this is will preserve IEEE_lsens.cls
% handling of captions.
%
% The latest version and documentation of subfig.sty can be obtained at:
% http://www.ctan.org/pkg/subfig
% *** PDF, URL AND HYPERLINK PACKAGES ***
%
\usepackage{url}
% url.sty was written by Donald Arseneau. It provides better support for
% handling and breaking URLs. url.sty is already installed on most LaTeX
% systems. The latest version and documentation can be obtained at:
% http://www.ctan.org/pkg/url
% Basic use: \url{my_url_here}.
%
%
% NOTE: PDF hyperlink and bookmark features are not required in IEEE
% papers and their use requires extra complexity and work.
\newcommand\MYhyperrefoptions{hypertexnames=true, bookmarks=true,
bookmarksnumbered=true, pdfpagemode={UseOutlines}, plainpages=false,
pdfpagelabels=true, colorlinks=true, linkcolor={black},
citecolor={black}, urlcolor={black}}
\ifCLASSINFOpdf
% \usepackage[\MYhyperrefoptions,breaklinks=true,pdftex]{hyperref}
\else
% \usepackage[\MYhyperrefoptions,dvips]{hyperref}
% \usepackage{breakurl}
\fi
%
% We will provide for these commands even if hyperref is not loaded to
% allow hyperref to be unloaded without have to delete any apprearances
% of these commands in the document.
\providecommand{\hypersetup}[1]{\relax}
\providecommand{\texorpdfstring}[2]{#1}
%
% We use \hypersetup instead of the package options for the
% PDF strings because there is a problem with using underscores
% with the package option approach. Also, the info that needs
% to be changed is all here.
% *** IF USING HYPERREF BE SURE AND CHANGE THE EXAMPLE PDF ***
% *** TITLE/SUBJECT/AUTHOR/KEYWORDS INFO BELOW!!
%
\hypersetup{pdftitle={Bare Demo of IEEE\_lsens.cls for IEEE Sensors Letters},%<!CHANGE!
pdfsubject={Typesetting},%<!CHANGE!
pdfauthor={Michael D. Shell},%<!CHANGE!
pdfkeywords={Class, IEEE, IEEE\_lsens, IEEE Sensors Letters, LaTeX, Typesetting, TeX}}%<^!CHANGE!}
%
% One significant drawback of using hyperref under DVI output is that the
% LaTeX compiler cannot break URLs across lines or pages as can be done
% under pdfLaTeX's PDF output via the hyperref pdftex driver. This is
% probably the single most important capability distinction between the
% DVI and PDF output. Perhaps surprisingly, all the other PDF features
% (PDF bookmarks, thumbnails, etc.) can be preserved in
% .tex->.dvi->.ps->.pdf workflow if the respective packages/scripts are
% loaded/invoked with the correct driver options (dvips, etc.).
% As most IEEE papers use URLs sparingly (mainly in the references), this
% may not be as big an issue as with other publications.
%
% That said, Vilar Camara Neto created his breakurl.sty package which
% permits hyperref to easily break URLs even in dvi mode.
% Note that breakurl, unlike most other packages, must be loaded
% AFTER hyperref. The latest version of breakurl and its documentation can
% be obtained at:
% http://www.ctan.org/pkg/breakurl
% breakurl.sty is not for use under pdflatex pdf mode.
%
% The advanced features offer by hyperref.sty are not required for IEEE
% submission, so users should weigh these features against the added
% complexity of use.
% The package options above demonstrate how to enable PDF bookmarks
% (a type of table of contents viewable in Acrobat Reader) as well as
% PDF document information (title, subject, author and keywords) that is
% viewable in Acrobat reader's Document_Properties menu. PDF document
% information is also used extensively to automate the cataloging of PDF
% documents. The above set of options ensures that hyperlinks will not be
% colored in the text and thus will not be visible in the printed page,
% but will be active on "mouse over". USING COLORS OR OTHER HIGHLIGHTING
% OF HYPERLINKS CAN RESULT IN DOCUMENT REJECTION BY THE IEEE, especially if
% these appear on the "printed" page. IF IN DOUBT, ASK THE RELEVANT
% SUBMISSION EDITOR. You may need to change/add the option for
% hypertexnames=false if you used duplicate equation numbers, etc., but
% this should not be needed in normal IEEE work.
% The latest version of hyperref and its documentation can be obtained at:
% http://www.ctan.org/pkg/hyperref
% correct bad hyphenation here
\hyphenation{op-tical net-works semi-conduc-tor}
\begin{document}
% The paper headers
\markboth{Vol.~1, No.~3, July~2017}{0000000}
% article subject line
\IEEELSENSarticlesubject{Sensor Applications}
% paper title
% Titles are generally capitalized except for words such as a, an, and, as,
% at, but, by, for, in, nor, of, on, or, the, to and up, which are usually
% not capitalized unless they are the first or last word of the title.
% Linebreaks \\ can be used within to get better formatting as desired.
% Do not put math or special symbols in the title.
%
\title{Bare Demo of IEEE\_lsens.cls for IEEE Sensors Letters}
% author names and IEEE memberships
% note positions of commas and nonbreaking spaces ( ~ ) LaTeX will not break
% a structure at a ~ so this keeps an author's name from being broken across
% two lines.
% use \thanks{} to gain access to the first footnote area
% a separate \thanks must be used for each paragraph as LaTeX2e's \thanks
% was not built to handle multiple paragraphs
%
\author{\IEEEauthorblockN{Michael~Shell\IEEEauthorrefmark{1}\IEEEauthorieeemembermark{1}, John~Doe\IEEEauthorrefmark{2},
and~Jane~Doe\IEEEauthorrefmark{2}\IEEEauthorieeemembermark{2}}% <-this % stops a space
\IEEEauthorblockA{\IEEEauthorrefmark{1}Department of Electrical and Computer Engineering,
Georgia Institute of Technology, Atlanta, GA, 30332, USA\\
\IEEEauthorrefmark{2}Indian Institute of Engineering Science and Technology, Shibpur, Howrah 711103, India\\
\IEEEauthorieeemembermark{1}Member, IEEE\\
\IEEEauthorieeemembermark{2}Senior Member, IEEE}%
% LSENS authors should provide a real e-mail address here.
\thanks{Corresponding author: M. Shell (e-mail: nospam@nospam.org).\protect\\
(For the real e-mail address, see http://www.michaelshell.org/contact.html).}% <-this % stops a space
\thanks{Associate Editor: Alan Smithee.}%
\thanks{Digital Object Identifier 10.1109/LSENS.2017.0000000}}
%
% note the % following lines that end in } -
% these prevent an unwanted space from occurring between the objects.
% i.e., if you had this:
%
% \author{....lastname \thanks{...} \thanks{...} }
% ^------------^------------^----Do not want these spaces!
%
% a space would be appended to the last name and could cause every name on that
% line to be shifted left slightly. This is one of those "LaTeX things". For
% instance, "\textbf{A} \textbf{B}" will typeset as "A B" not "AB". To get
% "AB" then you have to do: "\textbf{A}\textbf{B}"
% \thanks is no different in this regard, so shield the last } of each \thanks
% that ends a line with a % and do not let a space in before the next \thanks.
% For what it is worth, this is a minor point as most people would not even
% notice if the said evil space somehow managed to creep in.
% Manuscript received line
\IEEELSENSmanuscriptreceived{Manuscript received June 7, 2017;
revised June 21, 2017; accepted July 6, 2017.
Date of publication July 12, 2017; date of current version July 12, 2017.}
% for Sensors Letters papers, we must declare the abstract and index terms
% PRIOR to the title within the \IEEEtitleabstractindextext IEEEtran
% command as these need to go into the title area created by \maketitle.
% As a general rule, do not put math, special symbols or citations
% in the abstract or keywords.
\IEEEtitleabstractindextext{%
\begin{abstract}
The abstract goes here.
\end{abstract}
\begin{IEEEkeywords}
IEEE, IEEE Sensors Letters, LaTeX, paper, template.
\end{IEEEkeywords}}
% If you want to put a publisher's ID mark on the page you can do it like
% this:
\IEEEpubid{1949-307X \copyright\ 2017 IEEE. Personal use is permitted, but republication/redistribution requires IEEE permission.\\
See \url{http://www.ieee.org/publications\_standards/publications/rights/index.html} for more information.}
% Remember, if you use this you must call \IEEEpubidadjcol in the second
% column for its text to clear the IEEEpubid mark.
% make the title area
\maketitle
\section{Introduction}
This demo file is intended to serve as a ``starter file''
for \textit{IEEE Sensors Letters} papers produced under \LaTeX\
\cite{IEEEhowto:kopka} using IEEE\_lsens.cls version 1.0 and later.
I wish you the best of success.
\hfill mds
\hfill July 12, 2017
\subsection{Subsection Heading Here}
Subsection text here.
% needed in second column of first page if using \IEEEpubid
%\IEEEpubidadjcol
\subsubsection{Subsubsection Heading Here}
Subsubsection text here.
%\footnote{IEEE Sensors Letters does allow footnotes.}
% An example of a floating figure using the graphicx package.
% Note that \label must occur AFTER (or within) \caption.
% For figures, \caption should occur after the \includegraphics.
% Note that IEEEtran v1.7 and later has special internal code that
% is designed to preserve the operation of \label within \caption
% even when the captionsoff option is in effect. However, because
% of issues like this, it may be the safest practice to put all your
% \label just after \caption rather than within \caption{}.
%
% The IEEE does not put floats in the very first column - or typically
% anywhere on the first/title page for that matter. In addition, IEEE
% Sensors Letters typically puts floats only at the top, even when this
% results in an entire column being occupied by floats. Also, in-text
% middle ("here") positioning is not used.
%
% Double column floats (i.e., \begin{figure*}, \begin{table*}) should
% not appear on the very first (title) or last pages of IEEE Sensors Letters
% papers.
%
% Also note that IEEE Sensors Letters uses the naming convention of
% fig1.eps, fig2a.pdf, etc., for submitted graphics files.
%
%\begin{figure}[!t]
%\centering
%\includegraphics[width=2.5in]{fig1}
% where an .eps filename suffix will be assumed under latex,
% and a .pdf suffix will be assumed for pdflatex; or what has been declared
% via \DeclareGraphicsExtensions.
%\caption{Simulation results for the network.}
%\label{fig_sim}
%\end{figure}
% An example of a figure with subfigures using the subfig.sty package.
% (The subfig.sty package must be loaded for this to work.)
% The subfigure \label commands are set within each subfloat command,
% and the \label for the overall figure must come after \caption.
% \hfil is used as a separator to get equal spacing.
% Watch out that the combined width of all the subfigures on a
% line do not exceed the column width or a line break will occur.
%
%\begin{figure}[!t]
%\centering
%\subfloat[]{\includegraphics[width=1.5in]{fig1a}%
%\label{fig_lossrate_a}}
%\hfil
%\subfloat[]{\includegraphics[width=1.5in]{fig1b}%
%\label{fig_lossrate_b}}
%\caption{Measured and actual loss rates for each stage. (a) $p=0.30$. (b) %$p=0.60$.}
%% or (a), (b) can each carry a complete description:
%%\caption{(a) First description. (b) Second description.}
%\label{fig_lossrate}
%\end{figure}
% Note that IEEE Sensors Letters usually only labels the subfigures
% with (a), (b) and puts all other description within in the main caption.
% With subfig.sty, you still have to invoke the option argument
% (subfig caption) of \subfloat[]{} to get the (a), (b) labels, even if
% the subfig caption/description itself is empty.
% An example of a floating table. Note that, for IEEE style tables, the
% \caption command should come BEFORE the table and, given that table
% captions serve much like titles, are usually capitalized except for words
% such as a, an, and, as, at, but, by, for, in, nor, of, on, or, the, to
% and up, which are usually not capitalized unless they are the first or
% last word of the caption. The \label must come after \caption as always.
%
% Table text will default to \scriptsize as IEEE Sensors Letters normally
% uses this smaller font for tables.
%
% Note that IEEE Sensors Letters uses "open" style tables that do
% not typically use any vertical rules.
%
% Table example from: S. Banerjee, B. Rana, S. Pauri, S. Chatterjee
% and N. Dey, "HMSIW-Based Miniaturized Sensing Antennas for S- and C-Band
% Applications", IEEE Sensors Letters, February 2017.
%
% IEEEeqnarray version:
%\begin{table}[!t]
%\caption{Comparison of the HMSIW Semi-Circular Antenna With That of a Conventional Semi-Circular Patch Antenna.}
%\label{table_example_antenna}
%\centering
%\begin{IEEEeqnarraybox}[\IEEEeqnarraystrutmode\IEEEeqnarraystrutsizeadd{2pt}{1pt}][b][\columnwidth]{s+t+t}
%\IEEEeqnarraydblrulerowcut\\
%\IEEEeqnarrayseprow[2pt]{}\\
%Antenna parameters&Semi-cicular&HMSIW semi-circular\IEEEeqnarraystrutsizeadd{0pt}{-1pt}\\
%&patch antenna& antenna\IEEEeqnarraystrutsizeadd{-2pt}{-1pt}\\
%\IEEEeqnarrayseprow[2pt]{}\\
%\IEEEeqnarrayrulerow\\
%\IEEEeqnarrayseprow[2pt]{}\\
%Frequency&3.67 GHz&5.22 GHz\\
%Return Loss&-20 dB&-25 dB\\
%Co-polarization Gain&E-plane: 5.8 dBi&E-plane: 6.4 dBi\IEEEeqnarraystrutsizeadd{0pt}{-1pt}\\
%&H-plane: 5.8 dBi&H-plane: 5.3 dBi\IEEEeqnarraystrutsizeadd{-2pt}{0pt}\\
%Directivity&7.2&6.9\\
%Radiation Efficiency&82\%&92\%\\
%Mutual Coupling&-17 dB&-23 dB\\
%\IEEEeqnarrayseprow[4pt]{}\\
%\IEEEeqnarraydblrulerowcut
%\end{IEEEeqnarraybox}
%\end{table}
%
%
% Tabular version, loading the array.sty package is recommended:
%\begin{table}[!t]
%\caption{Comparison of the HMSIW Semi-Circular Antenna With That of a Conventional Semi-Circular Patch Antenna.}
%\label{table_example_antenna_tabular}
%\centering
%% increase table row spacing, adjust as needed
%\renewcommand{\arraystretch}{1.4}
%% if using array.sty, you can tweak the value of \extrarowheight
%% as needed to properly center the text within the cells
%\begin{tabular*}{\columnwidth}{l@{\extracolsep{\fill}}c@{\extracolsep{\fill}}c}
%\hline
%\hline
%Antenna parameters&Semi-cicular&HMSIW semi-circular\rule{0pt}{10pt}\\
%\noalign{\vskip -3pt}&patch antenna& antenna\rule[-5pt]{0pt}{5pt}\\
%\hline
%Frequency&3.67 GHz&5.22 GHz\rule{0pt}{10pt}\\
%Return Loss&-20 dB&-25 dB\\
%Co-polarization Gain&E-plane: 5.8 dBi&E-plane: 6.4 dBi\\
%\noalign{\vskip -3pt}&H-plane: 5.8 dBi&H-plane: 5.3 dBi\\
%Directivity&7.2&6.9\\
%Radiation Efficiency&82\%&92\%\\
%Mutual Coupling&-17 dB&-23 dB\rule[-6pt]{0pt}{6pt}\\
%\hline
%\hline
%\end{tabular*}
%\end{table}
\section{Conclusion}
The conclusion goes here.
% use section* for acknowledgment
\section*{Acknowledgment}
% addcontentsline needed when using bookmark hyperlinking, etc.
\addcontentsline{toc}{section}{Acknowledgment}
% enable scriptsize
\scriptsize
This work was supported by the IEEE. The authors would
like to thank ... Note that the Acknowledgment section of
\textit{IEEE Sensors Letters} is rendered in scriptsize.
% put at least one blank line to end the scriptsize paragraph and
% then revert back to normalsize.
\normalsize
% Last page column equalization
%
% IEEE Sensors Letters does balance the columns on the last page.
% Can use:
% \IEEEtriggeratref{8}
% to trigger a \newpage just before the given reference number to
% balance the columns on the last page. Adjust the reference number
% as needed - this may need to be readjusted if the document is
% modified later.
% The "triggered" command can be changed if desired:
%\IEEEtriggercmd{\enlargethispage{-5in}}
%
% Alternatively, you can also directly use something like
% \enlargethispage{-7in}
% on the last page instead of breaking at a specific reference number.
% references section
%
% can use a bibliography generated by BibTeX as a .bbl file
% BibTeX documentation can be easily obtained at:
% http://mirror.ctan.org/biblio/bibtex/contrib/doc/
% The IEEEtran BibTeX style support page is at:
% http://www.michaelshell.org/tex/ieeetran/bibtex/
%\bibliographystyle{IEEEtran}
% argument is your BibTeX string definitions and bibliography database(s)
%\bibliography{IEEEabrv,../bib/paper}
%
% Before submitting to IEEE Sensors Letters, manually copy in the
% resultant .bbl file contents in place of the \bibliographystyle and
% \bibliography lines here:
\begin{thebibliography}{1}
\bibitem{IEEEhowto:kopka}
H.~Kopka and P.~W. Daly, \emph{Guide to \LaTeX}, 4th~ed.\hskip 1em plus
0.5em minus 0.4em\relax Boston, MA: Addison-Wesley, 2004.
\end{thebibliography}
% that's all folks
\end{document}
